Skip to main content

Planned NASA mission to the 'ignorosphere' could improve space weather forecasts

 There is a layer of Earth's atmosphere that scientists know very little about. Dubbed the "ignorosphere," this layer at the edge of space plays a huge role in determining the intensity of space weather events. 

A new space mission is in the works that will attempt to shed more light on the processes that take place there, but it won't be ready before the current solar cycle ends. 


When bursts of charged particles from the sun that form the solar wind hit Earth, strange things happen in the planet's gaseous coat. Those heavy particles (protons, electrons and heavy ions) collide with atoms in the upper atmosphere, energizing them, Juha Pekka Luntama, the head of space weather at the European Space Agency (ESA), told.

Most of this energy exchange happens in the thermosphere, the second-highest layer of Earth's atmosphere that extends between altitudes of 60 miles to 360 miles (100 to 600 kilometers). The excess energy warms up the thermosphere and makes it swell. The density of the thin gases that fill this region of space increases. In turn, satellites in low Earth orbit face more drag and sometimes prematurely fall to Earth.

"It's like running against the wind," Anja Stromme, the manager of ESA's Swarm mission, which recently experienced problems maintaining kaltitude due to bad space weathker, told.

Most of these changes happen in the lowest layer of the thermosphere at altitudes of 60 miles to 120 miles (100 to 200 km), just above the Karman line, a widely recognized boundary between Earth's atmosphere and outer space. Scientists sometimes call this region "the ignorosphere," due to the dearth of data collected there.

"It's too high for balloons but too low for satellites," said Stromme.

Without these measurements, space weather forecasters have little means to improve their predictions of changes that happen in this region in response to solar flares and other sun eruptions. They have no way of providing proper insights to satellite operators whose spacecraft are at risk. In February this year, SpaceX experienced first hand how serious this risk can be when it lost 40 brand-new Starlink satellites that were victimized by bad space weather right after launch. 

"When we see an event on the sun, we can give a warning to satellite operators to be cautious and aware," Luntama said. "But it's very difficult to forecast exactly how big the impact is going to be and how much the atmospheric drag for the satellites will increase."

NASA and ESA have plans for a satellite mission that would help fill those gaps. Making such a mission work, however, is quite a challenge, as it would be at very high risk of succumbing to the exact phenomenon it would be launched to study.

"The problem is that, in this region, around 150 kilometers [90 miles] from Earth's surface, there is still too much atmosphere to slow satellites down," said Luntama. "If you were flying a mission there, it would stay in orbit only for a short time, and then it would spiral into the atmosphere and burn."

The two space agencies want such a mission to remain in orbit for years so that it gets exposed to space weather events of various frequency and intensity. The frequency with which the sun produces sunspots, which are the source of solar flares and eruptions that affect Earth, varies based on the sun's 11-year cycle of activity. To ensure that such a mission keeps providing insights as the sun moves through this cycle, mission engineers have to very carefully design the spacecraft's orbit so that it makes only very brief dips into the low altitudes of the ignorosphere while following an elliptical path.

"The perigee [the closest point to Earth] should be between 100 and 150 kilometers [60 and 90 miles] so that we can get the measurements," said Luntama. "The apogee [the farthest point from the planet] should be several hundreds of kilometers — 500 or 600 km [300 or 360 miles] —  which is clearly away from the atmosphere."

The spacecraft would circle the planet about every 90 minutes, Luntama said, using an on-board propulsion system to compensate for the loss of speed during the flight through the dense low-lying regions. 

"We would like to measure the charged particles [from the sun] but also the density of the atmosphere in this region," said Luntama. "We also need information about the magnetic field of Earth, because that changes during solar storms. And lastly, we need precise information about how the atmosphere slows down the satellite."

The mission, however, is still in the planning stages and will not make it into the ignorosphere before this solar cycle ends, Luntama added. 

"We have established a science team that consists of scientists from Europe and the U.S., and we are now working on defining the mission," Luntama said. "Once we define more precisely the mission objectives and the measurements that we want, then the engineering teams can start to look at how to build such a mission that can do this."

In the meantime, solar weather experts do what they can to improve their forecasts while the sun keeps exceeding their earlier predictions, producing many more sunspots, solar flares and eruptions than expected. After its first-hand encounter with the whims of space weather, SpaceX joined forces with the U.S. National Oceanic and Atmospheric Administration (NOAA) and started providing some basic data about the drag Starlink satellites experience during orbit-raising after launch, Tzu-Wei Fang, a NOAA space scientist, told.

 

Comments

Popular posts from this blog

Agnikul opens India's first rocket engine factory in Chennai

Space tech startup Agnikul Cosmos today inaugurated India's first-ever facility to manufacture 3D-printed rocket engines in Chennai. Named Rocket Factory 1, it was unveiled by Tata Sons chairman N Chandrasekaran and Isro chairman S Somanath in the presence of Pawan Goenka, the chairman of IN-SPACe (Indian National Space Promotion and Authorization Centre). The 10,000-square-foot facility is located at IIT-Madras Research Park. It will have a 400mm x 400mm x 400mm metal 3D-printer from  EOS that will enable end-to-end manufacturing of a rocket engine under one roof. The manufacturing facility has a capacity to make two rocket engines per week and thereby one launch vehicle every month, Agnikul co-founder Srinath Ravichandran told TOI. "This s a milestone for us as we go from R&D phase into core manufacturing with the opening of this facility, and begin productionizing the launch vehicle engine making. We have a lot of inbound interest [for launches] from global quarters...

ISRO is silently building Reusable Launch Vehicle

The Indian space agency is literally growing new wings as it gets ready to test a scaled down version of what can easily be described as the `swadeshi Space Shuttle'. The Indian Space Research Organisation (ISRO) calls it the `Reusable Launch Vehicle' or RLV. If all goes to plan very soon it will be seen flying over the Science City in Challakere, Karnataka, where the first landing experiment is being planned. S Somanath, Chairman, ISRO says "We are working silently on reusable rocket technology, with a very low budget, low cost and low investment." In the past USA and Russia have flown full-fledged winged space vehicles. Russia/USSR flew its vehicle called `Buran' only once in 1988 and the program was then shelved. USA made 135 flights of the Space Shuttle and in 2011 it was retired. Since then in a new burst of energy, USA, China and India are the only countries having an active program of re-useable rocket development. If all goes as per plan India's full...

ISRO is getting ready for Gaganyaan Abort Test with Special Test Vehicle

The first abort test using the special test vehicle (TV) part of #Gaganyaan, which was earlier targeted for the last quarter of this calendar year, is now expected only in early 2023. ISRO chairman S Somanath told: “There’s been a lot of progress & at this juncture we're looking at the first test in early 2023. The test vehicle is already at SHAR (spaceport in Sriharikota) and work on the crew module (CM) and crew escape system (CES) is progressing. As reported earlier, the test — TV technology demonstrator-1 (TV-TD1) mission — will demonstrate the descent phase, parachute deployment and recovery, among other things. While there will be more than one TV-TDs, in the first one, the CM will separate from the TV at a height of around 11km (from sea level), attain an altitude of around 15km before falling back to back in the Bay of Bengal. The Sriharikota ground team will track. Once separated or ejected from TV, CM will have a free fall. Essentially, will demonstrate crew e...